ER Systems Acrylic Asphalt Primer is a single component, water-based synthetic polymer elastomeric coating. This primer provides protection to asphalt substrates and may be applied over fresh asphalt emulsion as a base coat.

Features:

• Superior adhesion to asphalt substrates
• Highly reflective and has high elongation
• High hide capability
• Used in conjunction with Acrylic 1000 for the highest performing asphalt restoration System

Uses:

Acrylic Asphalt Primer may be used over new or aged smooth BUR, Modified Bitumen and asphalt emulsion as a base coat. Call ITW Polymers Sealants North America, Inc. Technical Service for applications over substrates other than asphalt.

Application:

Over Asphaltic Substrates: (APP and SBS Modified Bitumen, smooth BUR, Asphalt emulsions). Apply over clean, dry surfaces. (Consult ER Systems® Sample Design Guidelines) Allow to cure, then install 1.75 - 2.5 total gallons (6.62-9.46 liters) applied in two passes per 100 square feet of Acrylic 1000 Plus as a finish coat. Repair splits or cracks with fabric and Acrylic Asphalt Primer. Allow curing. Apply Acrylic Asphalt Primer as a base coat in 1/2 - 3/4 gallon (1.89-2.84 liters) per 100 square feet depending on surface texture.

Over smooth Emulsion, apply Acrylic Asphalt Primer at 1/2 - 3/4 gallons (1.89-2.84 liters) per 100 square feet followed by 1.75 - 2.5 total gallons (6.62-9.46 liters) applied in two passes per 100 square feet of Acrylic 1000 Plus. First coat is typically back rolled, with second coat rolled at right angles or spray applied.