Waterproofing barrier Aqua-Bloc SB Elastomeric Liquid Barrier is a one-component elastic fluid barrier  

HE77006 - AQUA-BLOC? SB may be used for above, on, and below-grade installation for waterproofing parking decks, tunnels, planters, mechanical rooms, reflective pools, and foundation walls. Excellent compound to repair hot rubberized asphalt membranes such as 790-11. Curing of the membrane should take place before polystyrene insulation is in direct contact.

Aqua-Bloc SB can be applied with a trowel or sprinkled on. It's put in a single or repeated use and fixed through solvent evaporation to form a strong, flawless, rubber-like, impenetrable membrane. AQUA-BLOC SB (HE77006) is a solo-component elastic water-resistant material that can be used to substitute hot mop felt ply and/or pre-formed sheeting methods. It's applied in one step and cures through solvent evaporation to form a heavy-duty seamless rubber-like, impenetrable membrane. It is designed for cold weather use. It is used to waterproof smaller areas, where the use of a trowel is more practical.

• It must be protected from damage during construction
• Do not use for potable water installations
• It is not designed to perform as a permanently exposed surface
• Solvent in HE77006 - AQUA-BLOC? SB attacks polystyrene insulation
• Application Outside Temperature: 10.4_F min
• Color: Black
• Maximum VOC: 380 g/l
• Shore A Hardness: 35
• Hardness, Shore A, ASTM C661: 30-35
• Recovery: 95%
• Solids By Weight: 60%
• Elongation (ASTM D412): 1500%
• Service Temperature: -40_F to 185_F
• Water Vapor Permeance @ 2.25 mm (90 mils): 2.9 ng/Pa.m2.s (0.05 perms)
• Flammability: Wet - Flammable, Dry - Burns
• Setting Time @ 45% R.H. 77_F: Initial Set 8 hrs., Set through 24 hrs.
• Weight Per Gallon: 7.5 - 7.9 lbs/gal.